Tandberg Data Autoloader Tandberg LTO2 - Manual (Page 66)

- 50 -
Operation 11
Wipe off remaining water on the Roller with a dry swab.
Operation 12 If you have finished Operation11, press the arrow key ( ) and define
the command. Then the Roller moves the final position as shown in
figure 5-13.
Display (line 1): CLEAN ROLL
Display (line 2): Finish >>
CAUTION
Do not insert your hands during displaying Caution message as
fingers may be pinched in the Roller.
Figure 5-13
Operation 13 You have finished cleaning the Roller.
Autoloader is ready to operate. Wait 30 minutes for becoming dry.
Important
Do not touch the Roller and dry the Roller completely.