Tandberg Data Autoloader Tandberg LTO2 - Manual (Page 3)

- i -
Keep this operation manual on hand so that you can refer to it when needed. Be sure to read
“Safety Precautions” before using this product.
Safety Precautions
- Be sure to read this section before using this product. –
Safety Descriptions
This manual describes dangers that may be caused by ignoring the cautions and the ways to
avoid those dangers. Warning labels are attached on the components that may cause danger.
“Warning” and “caution” terms are used for warning labels to describe the degree of the
danger.
WARNING
This indicates a hazard that could lead to death or
serious injury in the event of improper handling.
CAUTION
This indicates a hazard that could lead to burns, injury,
or property damage in the event of improper handling.
The following three types of symbols are used for warnings and cautions. The meaning of each
symbol is described below.
Attention
This symbol indicates that danger could be
caused if instructions are ignored. The
figure in the symbol indicates details of the
danger.
(Ex)
(CAUTION:
Electric shock)
Prohibited
action
This symbol indicates prohibited action. The
figure in the symbol or near the symbol
indicates details of the prohibited action. (Ex)
(Do not
disassemble.)
Mandatory
action
This symbol indicates mandatory action.
The figure in the symbol indicates details of
the mandatory action. The mandatory action
is required to avoid danger.
(Ex)
(Unplug)
(Description example in this manual)
Term indicating the degree of danger Details of caution to avoid danger
CAUTION
Only plug into specified electric outlet.
Plug the power supply cable into an electric outlet on the wall
with specified voltage and power supply. Fire or electric leak may
be caused if power supply other than the one specified is used.
Symbol prompting the caution