Tandberg Data Autoloader Tandberg LTO2 - Manual (Page 64)

- 48 -
Operation 6 If you have finished cleaning of the upper Roller, press the arrow key
(
) and define the command. Then the Roller moves backwards a little
as shown in figure 5-7.
Display (line 1): CLEAN ROLL
Display (line 2): Step 2 >>
Figure 5-7
CAUTION
Do not insert your hands during displaying Caution message
as fingers may be pinched in the Roller.
Tip
If you press the arrow key ( ) in this position of the Roller, the Roller moves
to previous position as shown in figure 5-6.
Operation 7
Then clean about three quarters of the Roller’s surface as shown in
figure 5-8. (Figure 5-9 shows it after cleaning.)
Figure 5-8 Figure 5-9