Tandberg Data Autoloader Tandberg LTO2 - Manual (Page 54)

- 38 -
5.1.1.1 Manually Cleaning of the Drive Head
Operation 1 Load the cleaning cartridge supplied with the main unit into any of the
slots. The cleaning cartridge is housed in slot number 5 in this example.
Operation 2 Use the panel keys to load the cleaning cartridge into the drive.
(Cleaning will start automatically.)
Display: cleaning (Displayed during cleaning.)
Operation 3 When cleaning is completed, "DRV full" is displayed.
Display: DRV full
Operation 4 Press the ENTER key.
Display: STATUS
Operation 5 Press the arrow key and select the "EJECT" command.
Display: EJECT
Operation 6 Press the ENTER key and define the "EJECT" command.
Display: Eject Drv?
Operation 6 Press the ENTER key and define the command.
Display: To Sl
ot 1?
Operation 7 Press the arrow key and select "To Sl
ot 5?".
Display: To Sl
ot 5?
Operation 8 Press the ENTER key and select the command.
Display: Complete (when the command ends normally.)
Err. xxxxxx (when an error occurs. xxxxxx is the error code.)