Tandberg Data Autoloader Tandberg LTO2 - Manual (Page 63)

- 47 -
Operation 2
Slightly moisten with water on cotton tip.
Use the submitted bottle to reserve water in the Roller Cleaner Set.
Operation 3
Then clean the surface of the upper Roller as shown in figure 5-4.
(Figure 5-3 shows the upper Roller before cleaning.)
Figure 5-3 Figure 5-4
Operation 4 If you finished cleaning the front side of the upper Roller, rotate it as
shown in figure 5-5 and clean all over the surface.
(Figure 5-6 shows the upper Roller after cleaning.)
Figure 5-5 Figure 5-6
Operation 5
Wipe off remaining water on the Roller with a dry swab.