Tandberg Data Autoloader Tandberg LTO2 - Manual (Page 61)

- 45 -
5.1.2.5.3 Setting Maintenance mode
To execute of the cleaning, setting maintenace mode is needed.
Operation 1 Switch ON the power and wait for the completion of power-on test.
Display: READY and DRV empty are alternately displayed.
Operation 2 Press the ENTER key.
Display: STATUS
Operation 3 Press the arrow key and select the MAINTENANC command
Display : MAINTENANC
Operation 4 Press the ENTER key and define the command.
Display (line 1): PASSWORD
Display (line 2): 0000000000
Tip
If you press the allow key, the number is up or down. If you press the enter
key, the number is decided and the cursor move next digit. If you have made a
mistake, press escape key. All numbers you have entered are canceled.
Tip
If you enter the invalid password, the following message will be displayed.
Display (line 1): PASSWORD
Display (line 2): invalid