Toshiba TLP780U - Manual (Page 55)

55
Document
imaging camera
STORE
CAMERA ARM LIGHT LOCK W.BALANCE
GAIN
FOCUS
STORE
CAMERA ARM LIGHT LOCK W.BALANCE
GAIN
FOCUS
STORE
CAMERA ARM LIGHT LOCK W.BALANCE
GAIN
FOCUS
STORE
CAMERA ARM LIGHT LOCK W.BALANCE
GAIN
FOCUS
STORE
CAMERA ARM LIGHT
LOCK W.BALANCE GAIN
FOCUS
1) Raise up the arm. Before preparations
(stowed away) 2) Stretch the arm. 3) Turn the arm.
4) Open the camera head. 5) Turn the camera head. 6) Pull up the light. 7) Turn the light.
STORE
CAMERA ARM LIGHT LOCK W.BALANCE
GAIN
FOCUS
STORE
CAMERA ARM LIGHT LOCK W.BALANCE
GAIN
Preparation of the document imaging camera
• Never give shocks or impacts to the camera or arm as this may cause malfunction.
• While raising up or turning the arm, the arm moves describing an arc, be careful not to hit your face or your body.
• The figures above are procedures of putting materials on the projector. When the stability of materials is required, place the materials at the back of
the projector and set the arm and camera head for them.
Notes
CONTENTS