Toshiba TLP780U - Manual (Page 39)

39
Operations
MENU
ON/STANDBY INPUT
L-CLICK R-CLICK
ENTER
KEYSTONE AUTO SET
PIP FREEZE
MUTE CALL RESIZE
VOLUME/ADJUST
LASER
EXIT EXIT
RESIZE
RESIZE
EXIT
RESIZE
RESIZE
/ / /
Enlarging the picture size
You can enlarge (resize) the picture size projected.
Press the EXIT button to cancel the resize mode and return to
the original size.
The icon appears in the resize mode.
Remote control
• Enlarged images can be frozen by pressing the FREEZE button. The images frozen also
can be enlarged or reduced.
• The resize mode is cancelled if any operation other than setting the freeze mode is performed.
• This projector uses electrical digital resizing, so the picture quality degrades when images
are enlarged.
• In rare cases, the picture may be disturbed while the magnification section is being moved.
• With some signals, the image cannot be enlarged.
• This function does not work in no input status (no signal is supplied from the signal source).
The enlarged section is moved when the selection buttons
( ) are pressed. The section can be moved
continuously by keeping the button pressed in.
To reduce the enlargement ratio, press the RESIZE ( )
button. The enlargement ratio can be reduced continuously
by keeping the button pressed in.
Press RESIZE ( ).
The enlargement ratio increases each time the RESIZE ( )
button is pressed. The enlargement ratio can be increased
continuously by keeping the button pressed in.
/ / /
Notes
CONTENTS