Toshiba TLP780U - Manual (Page 42)

42
Operations
MENU
ON/STANDBY INPUT
ENTER
KEYSTONE AUTO SET
EXIT
PIP FREEZE
MUTE CALL RESIZE
VOLUME/ADJUST
LASER
MENU
ON/STANDBY INPUT
L-CLICK R-CLICK
ENTER
KEYSTONE AUTO SET
EXIT
PIP FREEZE
MUTE CALL RESIZE
VOLUME/ADJUST
LASER
USB COMPUTER IN 1 COMPUTER IN 2
S-VIDEO VIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN
( Y/P B /P R )
MONITOR
OUT
CONTROL
Operating a computer by the remote control
You can control a computer by the remote control when the projector and computer are connected with the supplied USB cable.
In this manual, this function is explained as "mouse remote control".
To USB connector
Be sure to connect in the
proper direction.
USB cable (supplied)
To USB port
Remote control
Pointer control
R-CLICK
L-CLICK
Point the remote control at the remote control
sensor on the projector when operating with its
buttons.
• To move the pointer Press the outer side of the
pointer control button in the direction in which
you want to move the pointer. (The speed at
which the pointer moves depends on how
strongly the button is pressed.)
• To click
Press L-CLICK or the center of the pointer
control.
• To right-click
Press R-CLICK.
• To drag and drop
While holding down the center of the pointer
control, press the rim side to move the pointer to
the desired spot, then release the center part.
Computer
• This function is available with Windows98 and Mac OS9 computers equipped with a USB port as standard.
• When connecting the computer's USB port for the first time, a message asking you to insert the Windows98 CD-ROM may appear on the computer's
monitor screen, depending on whether or not the device driver is installed. If so, do as the message says.
• When using a USB cable other than the supplied one, be sure to use a shielded type.
Notes
CONTENTS