Full menu settings - default setting, 51 adjustments & settings – Toshiba TLP780U User Manual
Page 51
51
Adjustments &
Settings
Reset
The settings of FULL MENU [Default setting] are returned to the factory default setting
EXEC.
Projection mode
Standard
The projector placement is set to the floor-mounted front projection mode
SET
Rear
The projector placement is set to the floor-mounted rear projection mode
SET
Ceiling
The projector placement is set to the ceiling-mounted front projection mode
SET
Rear ceiling
The projector placement is set to the ceiling-mounted rear projection mode
SET
No signal background
Logo
The TOSHIBA logo is displayed when no signal is input
SET
Blue background
A blue color is displayed at full screen when no signal is input
SET
None
Nothing is displayed when no signal is input
SET
No signal power off
Off
The projector continues work even if the no signal status continues
SET
5 min.
The power turns off automatically if the no signal status continues for approx. 5 min.
SET
: COMPUTER IN 1 connector is selectable by INPUT button
: COMPUTER IN 2 connector is selectable by INPUT button
VIDEO
: Video input is selectable by INPUT button
SET
Input source setting
SET
COMPUTER IN 1
: Use COMPUTER IN 1 connector as Analog RGB(1) input
SET
Analog RGB(1)
: Use COMPUTER IN 1 connector as Y/P
B
/P
R
input
SET
Y/P
B
/P
R
SET
COMPUTER IN 2
: Use COMPUTER IN 2 connector as Analog RGB(2) input
SET
Analog RGB(2)
: Use COMPUTER IN 2 connector as Digital RGB input
SET
Digital RGB
S-VIDEO
: S-Video input is selectable by INPUT button
SET
CAMERA
: Camera input is selectable by INPUT button
SET
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Power on
Manual
The power turns on by pressing the ON/STANDBY button
SET
Auto
When the power cord is plugged, the power turns on
SET
Yes (common for all of the inputs)
Startup screen
On
The opening picture is displayed when the power is turned on
SET
Off
The opening picture is not displayed when the power is turned on
SET
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Digital RGB Y/P
B
/P
R
Video
The relationship between input source and item Yes: Adjustable -: Not displayed
S-Video Camera
Analog RGB(1) Analog RGB(2)
: On/Off with ENTER
: On/Off with (+) or (-)
FULL MENU settings - Default setting
• It is impossible to exit from the menu if no input source is selected.
• If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.
• In the following conditions, the function to detect no signal ("No signal background", "No signal power off") does not act:
1) When "Video mode" is set to other than [Auto] with selection of Video input or S-Video input.
2) When "Signal format" is set to other than [Auto] with selection of Y/P
B
/P
R
input.
• Note that the projector automatically turns on at the restoration from power failure, if "Power on" is set to [Auto] with the power cord being pluged, even
if it is not intended to.
• Even if "Power on" is set to [Auto], the setting of [5 min.] of "No signal power off" is effective.
• Each item can be set at all input sources, but the settings made at one input source are applied to commonness for all input sources.
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-
plugged or if a power failure occurs while the projector is on, the settings are not memorized.
Notes
You can set the Input source, projection mode, etc. from FULL MENU [Default setting].
To operate FULL MENU, refer to page .
CONTENTS