Toshiba TLP780U - Manual (Page 52)

52
Adjustments &
Settings
Reset all The adjustments and settings of all menus are returned to the factory default setting EXEC.
H-reference reset The horizontal reference value for "Auto. V-keystone" is calibrated automatically EXEC.
FULL MENU settings - Reset
• If the projector's foot adjuster is used or the projector is inclided, "H-reference reset" will not be executed properly.
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-
plugged or if a power failure occurs while the projector is on, the settings are not memorized.
• You can return the adjusting and setting value of all menus to the factory default setting. ("H-reference value" below also returns to the value at the
factory default setting.)
• The projector stores the standard conditions of horizontal installation, but depending on the usage environment (if the projector is subject to
vibrations or shock, etc.), the standard may change.
If the keystone distortion is not corrected properly when "Auto. V-keystone" is executed with the screen installed vertically, put the projector's
foot adjustor back and set the projector on a flat surface, then execute "H-reference reset"
20
35
Notes
CONTENTS