Toshiba TEC CB-426-T3-QQ - Manual (Page 82)

Appendix 1 Specifications
74
Appendix 1 Specifications
Appendix 1 describes the printer specifications and supplies for use on the CB-426-T3 two-color printer.
A1.1 Printer
This is the printer specification.
Model
Item
Supply voltage
Power consumption
Operating temperature range
Relative humidity
Print head density
Printing method
Print speed
Available media width (including backing paper)
Effective print width (max.)
Issue mode
Message display
Ribbon color
Dimension
Weight
Available print font
Available bar font
Rotations
Standard interface
Notes:
•
Data Matrix™, is a trademark of International Data Matrix Inc., U.S.
•
PDF417 TM is a trademark of Symbol Technologies Inc., US.
•
QR Code is a trademark of DENSO CORPORATION.
CB-426-T3-QQ
100 to 120V +10%
50/60Hz
3.5A, 300W maximum during a print job
360mA, 30W maximum during standby
40
°
F to 104
°
F (5
°
C to 40
°
C)
25% to 85% RH (no condensation)
305dpi (12 dots/mm)
Thermal transfer
•
4 inches/sec. (101.6mm/sec.)
•
6 inches/sec. (152.4mm/sec.)
2 in. to 4.4 in (50mm to 110mm)
4 in. (100.0mm)
•
Batch (with back feed)
•
Batch (no back feed)
•
Cut (Cut Mode is enabled only when the Cutter
Module is installed.)
16 characters/line
Spot colors
13.7 in. (W) x 20.4 in. (D)* x 15.1 in. (H)
(350mm (W) x 520mm (D)* x 385mm (H))
* 320 in. (800mm) when the Supply Shaft Holder is
installed.
About 77lb (35kg) (Media and ribbons are not
included.)
Times Roman, Helvetica, Letter Gothic, Prestige Elite,
Courier, Presentation, OCR-A, OCR-B, Outline
JAN, EAN, UPC, NW-7,CODE39/93/128/, MSI,
Industrial 2 of 5, Data Matrix™, PDF417™, QR code
0
°
, 90
°
, 180
°
, 270
°
•
Serial interface (RS-232C)
•
Parallel interface (Centronics) ECP Mode
•
Expansion I/O interface