Toshiba TEC CB-426-T3-QQ - Manual (Page 104)

Appendix 5 System Mode
96
Printing the X/Y Direction Alignment (Caliper-shaped Pattern)
Press the PAUSE key. “HEAD ADJUST” appears. Then press
the PAUSE key again.
Press the PAUSE key. The printer starts printing the X/Y
Direction Alignment Tests using the print conditions specified
above.
When printing completes, the message returns to “<2>
PARAMETER SET”.
Based on the printed patterns, make the X/Y direction alignment for
both colors.
HEAD ADJUST
X/Y Direction Alignment Tests
X Direction
Y Direction
ADJUST
A5.4 Parameter
Setting (Cont.)