Toshiba TEC CB-426-T3-QQ - Manual (Page 81)

Chapter 6 Troubleshooting
73
6.4 When the Ribbon
is Torn Apart This is a quick-fix procedure just in case the ribbon is torn apart in
the middle of printing.
1 Turn the printer off. Unplug the power cord. Open the Top Cover.
2 Turn the Head Lever to the OPEN position. Remove the Ribbon
Module containing the torn ribbon.
3 Remove the ribbon torn from the Ribbon Module.
4 Cut the torn parts off straight.
5 Align the torn ribbon carefully, and place a piece of tape completely
across both cut ends.
6 Reload the ribbon in the Ribbon Module.
7 Wind the ribbon by hand a few times so that the torn part is not
used for printing.
Tape