Toshiba TEC CB-426-T3-QQ - Manual (Page 56)

Chapter 3 Printing
48
3 Enter the ribbon color loaded in Head 1 (Back) in the same manner.
Since the black ribbon is loaded, select Black from the color list.
Do not mark the Color 2 checkbox when Head 1 is not used.
4 Click OK to complete the color setup.
If a desired color cannot be found in the color list, click the Color
1 or 2 down arrow, and select Custom to define the color similar
to the ribbon color loaded in the printer.
Click Define Custom Colors, and the Color screen appears.
3.4.3 Color Setup (Cont.)