Toshiba TEC CB-426-T3-QQ - Manual (Page 31)

Chapter 2 Printer Installation
23
8 Take up any slack in the ribbon. Replace the Ribbon Module into
the print head block by sliding it into the end.
Ribbon Module
Ribbon
9 Turn the Head Lever to the LOCK position to secure the Ribbon
Module. Take up any ribbon slack one more time by turning the
Ribbon Winding Core.
10 Load the other three ribbons in the same manner.
11 Close the Top Cover.
Print Head Block
2.7.2 Loading
Procedure (Cont.)
Ribbon Module
Ribbon Winding Core