Toshiba TEC CB-426-T3-QQ - Manual (Page 113)

Appendix 5 System Mode
105
Clearing the Print Distance
When “<4> RAM CLEAR” is shown, press the PAUSE key.
“NO RAM CLEAR” appears again. Press the FEED key three
times.
The print distance can be cleared by pressing the PAUSE key.
The print distance for all colors can be cleared by pressing the
PAUSE key.
When the print distance for all colors is cleared successfully,
“COMPLETE” appears.
The printer must be turned off to exit this mode.
Notes:
•
See A5.7.9 for further information
about the initial values after
clearing the print distance.
•
To clear the print distance for
either Head 1 or 2, press the
FEED key to select the Head.
Select “NONE” not to clear the
print distance for both colors.
NO RAM CLEAR
PRINT STEP CLEAR
ALL COLOR
A5.6 RAM Clear
(Cont.)