Teledyne Refrigerated Sampler 6712FR - Manual (Page 84)

6712FR Refrigerated Sampler
Section 4 Standard Programming
4-28
4.16 System IDs
In addition to viewing report data and configuring reports, the
View Report option on the main menu lets you view system iden-
tification information.
The sampler reports the sampler model number, ID (identifi-
cation number), and software version number as system identifi-
cation notes. The sampler also reports the same information for
an attached module.
The model and ID numbers remain unchanged through the life of
the sampler. The ID numbers appear on the sampler’s reports
and in files created by flowlink and samplink when they inter-
rogate the sampler. The software packages use the ID number to
make sure that data from different samplers is not combined in
the same file.
The software version number changes when your sampler’s
software is updated.
The system will also list any software options that you have acti-
vated on your unit. These software options are discussed in
Section 5.
4.17 Programming for 700
Series Modules
The bay on the controller’s side accepts any of Teledyne Isco’s 700
Series Modules. These modules are optional accessories that are
not required for operation of the 6712. However, the modules
offer an economical way to combine flow-rate or parameter moni-
toring with sampling.
The programming of these modules is integrated with the pro-
gramming of the sampler, so attachment of a module will cause
different screens to be displayed, depending on the type of
module and the selections you make while programming.
Two modules that are commonly used are the 730 Bubbler
Module, which monitors a flow stream’s level and flow rate, and
the 750 Area Velocity Module for monitoring a flow stream’s
level, velocity, and flow rate. The following sets of screens give
you an example of what screens you might see while pro-
gramming the sampler and module. Refer to Table 4-1 (which
does not have a module attached) at the beginning of this section
to compare the sequence of screen displays.
System IDs
RUN
PROGRAM
VIEW REPORT
OTHER FUNCTIONS
• Select VIEW REPORT.
VIEW DATA
SYSTEM IDs
CONFIGURE REPORTS
• Select SYSTEM IDs.
SAMPLER
6712 ID __________
HARDWARE: __
SOFTWARE: __
• Displayed briefly
[MODULE TYPE]
[MODEL #] ID: __________
HARDWARE: __
SOFTWARE: __
• Displayed briefly
SOFTWARE OPTIONS
[Options List]
• Press STOP to return to the
main menu.