Teledyne Refrigerated Sampler 6712FR - Manual (Page 53)

6712FR Refrigerated Sampler
Section 3 Programming Introduction
3-9
3.6.1 Information Messages These are brief messages about the programming status, such as
“‘ROM’ PASSED TEST” or the status message that displays
when you first start up the sampler. Information messages are
displayed for four seconds, unless they are terminated by
pressing any key on the keypad.
3.6.2 Help Notes To see a Help note:
1. Press the ? (Help) key.
2. When the note requires several screens, the word “more”
appears in the lower-right corner. Press
↵ for the next note.
3. Move back and forth between screens by pressing the
arrow keys.
4. Press Stop at any time to return to the programming
screen.
Most help notes refer to a related section in this manual. Screens
that require extensive explanation have notes that contain only a
reference to the manual. Sections mentioned in the notes appear
in the index and the table of contents.
SUCTION LINE LENGTH
IS 7 ft
(3-99)
•Press ? (Help) .
Enter the length of
suction line only,
excluding strainer
and pump tube.
•Press
↵
or Down-Right to
see the next screen.
•Press Stop to return to the
programming screen.
See “Installing
Suction Line” in
your manual.
•Press
↵
or Down-Right to
see the next screen.
•Press Up-Left to see the
previous screen.
•Press Stop to return to the
programming screen.
Press the red STOP
key to exit HELP.
•Press Up-Right to see the
previous notes.
•Press Stop to return to the
programming screen.
Using Help Notes
Although this example shows
the Help Notes that are asso-
ciated with the suction line
length screen, you can use the
same technique to see help
notes for other screens.