Teledyne Refrigerated Sampler 6712FR - Manual (Page 66)

6712FR Refrigerated Sampler
Section 4 Standard Programming
4-10
Figure 4-2 Start Time Diagram
4.7 Running Programs To run a program, select RUN from the main menu. You may also
select YES at the RUN THIS PROGRAM NOW? screen at the
end of the programming screens.
4.7.1 Run Time Screens While running a sampling program the sampler displays a
variety of messages that report the program’s status. For
example, if the sampler has not yet reached the programmed
start time, it displays the scheduled start time as well as the
current time.
Once the program reaches the start time, you can determine the
time of the next sample, the next bottle to receive a sample,
sample distribution, and other information. Other messages
appear while the sampler runs through a sampling cycle and
takes a sample. When the sampler needs to report multiple mes-
sages, it alternates them, displaying each for one to three
seconds.
Sampler disabled at
start time by
signal from pin F
A sample is not taken at start time
if the sampler is disabled. No samples
are taken while disabled.
Sampler enabled at
start time
A sample event at the start time
occurs for time-paced programs.