Quatech AirborneDirect WLNG-ET Series - Manual (Page 55)

Airborne Control Center
100-8007-141G AirborneDirect™
Ethernet Bridge User's Guide Page 49
Quatech, Inc. Confidential
Restarting the Bridge
When you click the Restart button, you will see the Warning displayed in
XX
Figure 20
XX
. Click Yes to
complete the Bridge restart or No to stop the process and return to the Reset Page.
Figure 23. Confirm Restart
XX
Figure 21
XX
will be displayed after you have clicked Yes. Click OK to dismiss this informational
dialog. Once the restart has been completed, the ACC will display the Status Page.
Figure 24. Reset In Progress
Note:
If the Status Page does not reappear, click the Status link on the
navigation bar. If it still does not reappear, determine whether the Bridge’s
IP address changed. If it did, click the Login link on the navigation bar and
log in to the Bridge again. Otherwise, try the Bridge’s old IP address again.
The ACC may timeout before the Bridge can obtain its DHCP lease.