Quatech AirborneDirect WLNG-ET Series User Manual
Page 54

Airborne Control Center
Page 48
AirborneDirect™ Ethernet Bridge User's Guide
100-8007-141G
Quatech, Inc. Confidential
Reset Page (Advanced Configuration Settings)
The Reset Page allows you restart or reset the Bridge to the factory default values.
Caution:
Resetting the AirborneDirect™ unit to factory defaults will remove all
customer changes. If the target AP has WEP or WPA enabled, the
AirborneDirect™ unit will not be able to associate (WEP/WPA default is
disabled).
Figure 22. Reset Page
This manual is related to the following products: