beautypg.com

Quatech AirborneDirect WLNG-ET Series User Manual

Page 45

background image

Airborne Control Center


100-8007-141G AirborneDirect™

Ethernet Bridge User's Guide

Page 39

Quatech, Inc. Confidential

DHCP Fallback Subnet

Configures the Subnet Mask used by the DHCP fallback
algorithm.
Default is

255.255.255.0

DHCP Fallback Gateway

Configures the gateway address used by the DHCP fallback
algorithm.
Default is

0.0.0.0.

Static IP Address

If you use a static IP, each Bridge must have a unique IP
address. The IP address must adhere to the network’s subnet
mask and fall within the valid range of IP addresses for the
network. The Bridge’s static IP address must contain up to four
octets separated by a period. If Enable DHCP is checked, this
parameter is ignored.
Default is 0.0.0.0.

Subnet Mask

Bridge’s subnet mask, up to four octets separated by a period.
Default is 0.0.0.0.

Default Gateway/Router IP
Address

Bridge’s LAN IP address, up to four octets separated by a
period.
Default is 0.0.0.0.

Primary DNS

Sets the primary DNS server address for DNS look-ups. If
DHCP is enabled, the IP address provided by the DHCP
server is used.
Default is 0.0.0.0.

Secondary DNS

Sets the secondary DNS server address for DNS look-ups
when the primary DNS server is unavailable.
Default is 0.0.0.0.

Discovery Settings

User Discovery Name

Sets the name_device field, which can be retrieved with the
CLI name_device command.
Default is Device.