Quatech AirborneDirect WLNG-ET Series User Manual
Page 48

Airborne Control Center
Page 42
AirborneDirect™ Ethernet Bridge User's Guide
100-8007-141G
Quatech, Inc. Confidential
Table 8. Network Services Settings
Parameter
Description
Enable UDAP
When checked, enables Universal Data Appliance Protocol
(UDAP). This allows the Bridge to be discovered from a
LAN-based device that supports the UDAP protocol.
Default is checked.
Telnet Port
Specifies the port number of the Telnet server.
Default is 23.
Telnet Inactivity Timeout – seconds
Specifies the number of seconds of inactivity that must
occur for the Telnet session to timeout. Setting the timeout
to 0 disables it.
Default is 60.
This manual is related to the following products: