Quatech AirborneDirect WLNG-ET Series - Manual (Page 41)

Airborne Control Center
100-8007-141G AirborneDirect™
Ethernet Bridge User's Guide Page 35
Quatech, Inc. Confidential
Table 6. Wireless Network Configuration Settings
Parameter Description
Wireless Network Settings
SSID Service Set Identifier that identifies the common service set
for the Bridge and AP. To make this connection, the Bridge
and AP must have the same SSID.
Default setting is any (this field may not be blank).
Wireless Network Type Specifies the type of network in which the Bridge will be
used:
• Infrastructure – connects to a WLAN using an
AP. (default)
• Ad-Hoc – used to connect two peer-to-
peer devices.
Ad-Hoc Mode Channel When Wireless Network Type is Ad-Hoc, selects the
channel used for communication. The two peer-to-peer
devices must use the same channel. Range is 1 to 14
channels.
Default channel is 1.
WLAN Region Code Bridge Operation Region
Specifies the wireless channels allowed. See
XX
Table 6.
Region Country Codes
XX
on page
XX
40
XX
.
Default is US.