Quatech AirborneDirect WLNG-ET Series - Manual (Page 14)

Hardware Installation
Page 8
AirborneDirect™ Ethernet Bridge User's Guide 100-8007-141G
Quatech, Inc. Confidential
TT
ITEMS SUPPLIED BY THE USER
TT
The following items, which are not included in the package contents, are also required:
ƒ
TT
An Ethernet client, with an RJ-45 jack, that is within the transmit and receive range of the
Access Point to be used with the Bridge.
ƒ
TT
A LAN host running any operating system with TCP/IP (the ACC requires Microsoft
PP
®
PP
Windows
PP
®
PP
XP or Windows 2000).
ƒ
TT
An IEEE 802.11b/g-compliant Access Point
TT
with DHCP enabled
TT
.
ƒ Mounting hardware for the AirborneDirect™ bracket mounting.
TT
Note:
Other Access Points in the area may interfere with the Bridge’s ability to
associate with your chosen Access Point (the Bridge will try to associate
with the first available “best-quality” AP). If you encounter difficulties with
connecting to your chosen AP, either remove power from these Access
Points or move to an isolated location, and then perform the setup in Figure
1 on page 3
XX
.