Quantum Instruments DLT 7000 - Manual (Page 222)

SCSI Commands
5-118 Quantum DLT 7000 Tape System
MODE SENSE (6) / (10) Command (1Ah / 5Ah) (continued)
5.10.3.5 Device Configuration Page (10h)
The tape drive supports the Device Configuration Page. The format for the page
is illustrated in the following figure.
Bit
Byte
7 6 5 4 3 2 1 0
0 PS (0) 0 Page Code (10h)
1 Additional Page Length (0Eh)
2 Rsv’d CAP (0) CAF (0) Active Format (0)
3 Active Partition (0)
4 WRITE Buffer Full Ratio (0)
5 READ Buffer Empty Ratio (0)
6 - 7
(MSB)
WRITE Delay Time
(LSB)
8 DBR (0) BIS (0) RSmk AVC (0) SOCF (0) RBO (0) REW (0)
9 Gap Size (0)
10 EOD Defined (0) EEG (1) SEW (1) Reserved
11 - 13
(MSB)
Buffer Size at Early Warning (0)
(LSB)
14 Select Data Compression Algorithm
15 Reserved
Figure 5–57 Device Configuration Page - Data Format