Log sense command (4dh) (continued) – Quantum Instruments DLT 7000 User Manual
Page 166
SCSI Commands
5-62
Quantum DLT 7000 Tape System
LOG SENSE Command (4Dh) (continued)
5.8.8 Device Status Page (3Eh)
The Device Status Page describes the current status of the tape drive.
Bit
Byte
7
6
5
4
3
2
1
0
0
Reserved
Page Code (3Eh)
1
Reserved
2 - 3
(MSB)
Page Length
(LSB)
Figure 5–29 Device Status LOG SENSE Header Format
Table 5–32 Device Status LOG SENSE Header Field Descriptions
Field Name
Description
Page Code
The Page Code echoes the page code that was specified in the
LOG SENSE command descriptor block.
Page Length
The Page Length field specifies the number of bytes available and
depends on the parameters requested.