Quantum Instruments DLT 7000 - Manual (Page 157)

SCSI Commands
Quantum DLT 7000 Tape System 5-53
LOG SENSE Command (4Dh) (continued)
Table 5–26 TapeAlert Flags, Severity Levels, and Meanings (continued)
Flag Severity Level * Meaning
22 Expired Cleaning
Media Critical The cleaning cartridge that was used has expired. Wait for
all tape drive operations to complete, then use a valid
cleaning cartridge for cleaning.
31 Hardware B Critical The tape drive may have a hardware fault. Contact a service
representative.
32 Interface Warning The drive has identified a problem with the interface
to/from the host.
34 Download Fail Warning The attempted firmware download has failed.
40 Loader
Hardware A Critical The mechanism that loads media to the tape drive is
experiencing problems communicating with the tape drive.
42 Loader
Hardware B Warning The loader mechanism has experienced a hardware-related
fault.
43 Loader Door Critical The attempted operation has failed: the library/autoloader
door is not closed completely.
* Severity levels are Informational, Warning, and Critical. Informational flags provide a status-type
message, Warning and Critical flags indicate that user intervention and/or service call may be required.