Omega RD100B - Manual (Page 209)

12-7
Specifications
12
12.4 Display Function Specifications
Display and Displayed Contents
This section explains the specifications of the display functions of measurement channels and computation channels (/M1 option).
Display examples are illustrations used to explain the displayed contents and differ in appearance from the actual displays.
Item Specifications
Display VFD (101 × 16, dot matrix)
Up to 11 characters using large fonts. 17 characters × 2 lines using normal fonts.
Number of screens 15 (switched using keys)
Displayed information
Display type 1-channel digital display
2-channel digital display
4-channel digital display
6-channel digital display (dot model)
1-channel digital + 1-channel bar graph
1-channel digital + 4-channel bar graph (pen model)
2-channel digital + 2-channel bar graph
4-channel bar graph (pen model)
6-channel bar graph (dot model)
Flag display
Channel alarm status display
Date, time, and chart speed display
DI/DO status display
1-channel digital display (tag display)
2-channel digital display (tag display)
1-channel digital + 1-channel bar graph (tag display)
1-channel digital + 4-channel bar graph (tag display) (pen model)
Status display
System display
Lights off
Skip
Multiple display
The following screens can be assigned arbitrarily to the top and bottom sections of the display.
1-channel digital display
2-channel digital display
Date/Time
Chart speed display
Channel alarm status display
Status display
Lights off
1-channel digital display (tag display)
Display update of measured values / computed values
When displayed channels are fixed
Dot model: Updated at the scan interval
Pen model: Updated every 2 s
When displayed channels are automatically switched
Switches the channel and measured values at 1, 2, 3, 4, or 5 second intervals.
Status display
RECORD This indicator turns ON when recording is started and turns OFF when stopped.
ALARM The indicator turns ON when an alarm occurs and turns OFF when the alarm is released.
If the alarm indication is set to hold operation, the indicator blinks when an alarm occurs. When
alarm ACK operation is performed, the indicator turns ON or OFF.
MATH This indicator turns ON when computation on the computation function (/M1 option) is started and
turns OFF when stopped.
KEYLOCK This indicator turns ON when key lock is activated and turns OFF when released.
CHART END This indicator turns ON when the remaining amount of chart paper falls to approximately 2 cm on
models with the FAIL/chart end detection and output function (/F1 option).