Omega RD100B User Manual
Page 134
7-11
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
7
Applying the Changes and Returning to Operation Mode
Press the
key or SHIFT +
key to select End and then press the
key. Press
the
key to select Store and then press the
key. The changes are applied, and
the screen returns to Operation mode. If you select Abort and press the
key, the
changes are discarded, and the screen returns to Operation mode. Press the ESC key
to return to the Basic= screen.
Explanation
CH/Tag
Channel: Prints the channel number.
Tag: Prints the tag.
Channel (Dot Model)
When On is selected channel No. is printed by the trend recording.
Alarm
On1:
Prints the alarm information when an alarm occurs or releases.
On2:
Prints the alarm information only when an alarm occurs.
Off:
Does not print alarm information.
Pen Color Printout
When On is selected, the recording color of the channel whose scale is printed is printed.
This is valid on channels whose scale printout is turned On.
7.7 Turning Printouts ON/OFF.