Omega RD100B User Manual

Page 136

7-13

Setup Operations for Changing/Adding Functions (Basic Setting Mode)

Types of Report Data to Be Printed

Changing the Settings

Hold down the

MENU

key for 3 seconds to enter Setting mode.

Hold down the

and

keys simultaneously for 3 seconds to enter Basic

Setting mode.

Press the

key or SHIFT +

key to select Print2 and then press the

key.

Set each item and press the

key.

Use the

key or SHIFT +

key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up

to then are cancelled, and the display returns to a higher level menu.

When the Setting complete screen appears, do either of the following:

Press the

key to set other channels.

If you are done, press the ESC key.

Select the type of report data to print.

Set the channel range.

Select the sum scale.

The new setting takes effect.

ESC/?

First channel Last channel

Printout2
Setting complete

Basic=Print2

CH=01-01

Mode=AVE

SUM scale=Off

Applying the Changes and Returning to Operation Mode

Press the

key or SHIFT +

key to select End and then press the

key. Press

the

key to select Store and then press the

key. The changes are applied, and

the screen returns to Operation mode. If you select Abort and press the

key, the

changes are discarded, and the screen returns to Operation mode. Press the ESC key

to return to the Basic= screen.

7.8 Setting the Periodic Printout Interval and the Type of Measured Values to Be Printed