10 setting the key lock function – Omega RD100B User Manual

Page 139

7-16

7.10 Setting the Key Lock Function

This section explains the details of setting the keys that can be locked and the password

for releasing the key lock.

Basic Setting mode cannot be entered when recording is in progress or when

computation is in progress on models with the computation function (/M1 option).

Procedure

Changing the Settings

Hold down the

MENU

key for 3 seconds to enter Setting mode.

Hold down the

and

keys simultaneously for 3 seconds to enter Basic

Setting mode.

Press the

key or SHIFT +

key to select Keylock and then press the

key.

Set each item and press the

key.

Use the

key or SHIFT +

key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up

to then are cancelled, and the display returns to a higher level menu.

When the Setting complete screen appears, do either of the following:

To correct the setting, press the

key.

If you are done, press the ESC key.