Omega RD100B - Manual (Page 115)

6-7
Setup Operations for Convenient Functions (Setting Mode)
6
6.7 Setting Tags on Channels
This section explains the details of setting tags to measurement channels.
Procedure
1. Hold down the MENU key for 3 seconds to enter Setting mode.
2. Press the key or SHIFT + key to select Aux and then press the
key.
3. Press the key or SHIFT + key to select Tag and then press the
key.
4. Set each item and press the key.
Use the key or SHIFT + key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up
to then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
6. Hold down the MENU key for 3 seconds to return to Operation mode.
Set the channel range.
Set the tag.
The new setting takes effect.
ESC/?
First channel Last channel
Set=Aux
Aux=Tag
CH=01-01
Tag=
01-01 Channel
Setting complete
Explanation
Characters That Can Be Used for Tags
Set the tag using up to 7 characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω, 2 , 3 , .), and space
Printing tags in place of channel numbers: Section 7.7