Omega RD100B User Manual
Page 114
6-6
6.6
Turning Trend Recording (Dot Model) and
Periodic Printout ON/OFF for Each Channel
This section explains the details of setting the trend recording and periodic printout for
each measurement channel.
The following settings can be entered for each channel on the dot model.
• Turn trend recording ON/OFF.
• Turn the printing of measured values ON/OFF during periodic printout.
The following setting can be entered for each channel on the pen model.
• Turn the printing of measured values ON/OFF during periodic printout.
Procedure
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Press the
key or SHIFT +
key to select Aux and then press the
key.
3.
Press the
key or SHIFT +
key to select Print out and then press the
key.
4.
Set each item and press the
key.
Use the
key or SHIFT +
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up
to then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
Press the
key to set other channels.
If you are done, press the ESC key.
6.
Hold down the
MENU
key for 3 seconds to return to Operation mode.
Set the channel range.
Turn trend recording On/Off.
Select whether to print the measured
values during periodic printout (On/Off).
The new setting takes effect.
ESC/?
First channel Last channel
Set=Aux
Aux=Print out
CH=01-01
Trend=On
Periodic=On
01-01 Channel
Setting complete
Explanation
Trend Recording (Dot Model)
On: Turns On the trend recording of the specified channel.
Periodic Printout
On: Turns On the printing of the measured values of the specified channel during
periodic printout.