3 setting the unit – Omega RD100B User Manual

Page 166

9-9

Operations Related to the Computation Function (/M1 Option)

9.3

Setting the Unit

This section explains the details of setting the unit on computation channels.

Procedure

Hold down the

MENU

key for 3 seconds to enter Setting mode.

Press the

key or SHIFT +

key to select Math and then press the

key.

Press the

key or SHIFT +

key to select Unit and then press the

key.

Set each item and press the

key.

Use the

key or SHIFT +

key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up

to then are cancelled, and the display returns to a higher level menu.

When the Setting complete screen appears, do either of the following:

Press the

key to set other channels.

If you are done, press the ESC key.

Hold down the

MENU

key for 3 seconds to return to Operation mode.

Set the channel range.

The new setting takes effect.

ESC/?

Set the unit.

First channel

Last channel

0A-0A Channel
Setting complete

Set=Math

Math=Unit

CH=0A-0A

Unit=

Explanation

Characters That Can Be Used for Units

Set the unit using up to 6 characters.

The available characters are as follows:

Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,

, .), and space