Warranty – Omnitron Systems Technology iConverter 10/100M User Manual
Page 46

Possible Causes:
A. Confirm that the UTP cable is connected properly to the iConverter 10/100M and the attached UTP
device. Once a connection has been established between the iConverter and its link partner (switch or
workstation), the UTP “10/100” LED should illuminate. If the LED does not illuminate, check the Link
Mode configuration. A link mode other than Link Segment may cause the UTP “10/100” LED not to turn
ON.
B. Verify the iConverter 10/100M UTP port is configured with the proper settings based on the attached
device (AN or MAN, 10 or 100, HD or FD).
C. Verify the distance between the iConverter and the link partner is within 100 meters.
D. Confirm that the UTP cable pin-out is correct (EIA/TIA-568-A). The module has auto-crossover
capability, so it will accept either a straight-through or crossover cable.
NOTE: If corrective actions do not resolve your situation, please contact Omnitron Systems Technical
Support.
Page 46
- iConverter 2GXT Standalone (2 pages)
- iConverter GX/T2 Plug-in Module (2 pages)
- iConverter GX/T2 Standalone Module (2 pages)
- iConverter 2-Port SFP to SFP GM4 (2 pages)
- iConverter 3-Port GM4 (2 pages)
- iConverter 2-Port GM4 (2 pages)
- iConverter 4GT Plug-in Module (2 pages)
- iConverter 4GT Standalone Module (2 pages)
- iConverter Network Management Module (25 pages)
- iConverter Network Management Module (2 pages)
- iConverter GXTM Standalone Quick Start (2 pages)
- iConverter GXTM Plug-in Module (2 pages)
- Converter GXTM User Manual (48 pages)
- iConverter 2FXM User Manual (46 pages)
- iConverter 2FXM Standalone Quick Start (2 pages)
- iConverter 1-Module Power Chassis (4 pages)
- iConverter 1 Module Redundant Power Chassis (26 pages)
- iConverter 2-Module Power Chassis (12 pages)
- iConverter T3/E3 Standalone Module (2 pages)
- iConverter T3/E3 Plugin Module (2 pages)
- iConverter 19-Module Chassis (10 pages)
- iConverter 5-Module Chassis (8 pages)
- iConverter RS422/485 (1 page)
- iConverter X21 Standalone Module (2 pages)
- iConverter X21 Plug-in Module (2 pages)
- iConverter RS232 (1 page)
- iConverter 4Tx VT (1 page)
- iConverter 4Tx (1 page)
- iConverter Tx/2Fx (1 page)
- iConverter T1/E1 Standalone Module (2 pages)
- iConverter T1/E1 Plugin Module (2 pages)
- iConverter STM 1 Standalone (2 pages)
- iConverter STM 1 Plug-In (2 pages)
- iConverter 2Fx (1 page)
- iConverter xFF Standalone Module (1 page)
- iConverter xFF Plugin Module (1 page)
- iConverter 2FXM2 Standalone Module (2 pages)
- iConverter 2FXM2 Plugin Module (2 pages)
- iConverter 2GXM2 Standalone Module (2 pages)
- iConverter 2GXM2 Plugin Module (2 pages)
- iConverter 100Fx/Tx (1 page)
- iConverter 10/100 (2 pages)
- iConverter 10/100M2 Standalone Module (2 pages)
- iConverter 10/100M2 Plugin Module (2 pages)