3 port configuration, Port access, Page 28 – Omnitron Systems Technology iConverter 10/100M User Manual
Page 28
4.3
PORT CONFIGURATION
The Port configuration screen provides access to the port level configuration parameters, such as, Port
Access, Bandwidth Control, SFP information, 802.3ah, Port VLANs, Tagged VLANs and cNode Loopback.
To access the Port configuration screen, select C from the Module configuration screen and press
The Port configuration screen will appear.
Module - iConverter 10/100M iConverter, Serial Agent
Identifier -
Chassis Number
= 1
Port VLAN Path Setup
Slot Number
= 11 ----------------------------------
Model Number
= 8919-0
11: Fiber to UTP
Enable
On
12: Fiber to BP A
Enable
On
Port Access Control Setup
13: Fiber to BP B
Enable
On
----------------------------------
14: UTP to BP A
Enable
On
1: Fiber Enable
On
15: UTP to BP B
Enable
On
2: UTP Enable
On
16: BP A to BP B
Enable
On
17: Fiber to Mngmnt
Enable
On
Enhanced Features
18: UTP to Mngmnt
Enable
On
----------------------------------
19: BP A to Mngmnt
Enable
On
3: 802.1Q Processing Enable
Off
20: BP B to Mngmnt
Enable
On
4: Configure Tag VLAN Control
5: Configure VLAN Membership
Bandwidth Control
6: Save TAG VLAN parameters --------------------------------
7: Configure 802.3ah parameters
21: Ingress rate Fiber
No Limit
8: Configure 802.3ah events
22: Egress rate Fiber
No Limit
9: SFP Information
23: Ingress rate UTP
No Limit
10: cNode Loopback
24: Egress rate UTP
No Limit
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Module - iConverter 10/100M iConverter, Serial Agent
Identifier -
Chassis Number
= 1
Port VLAN Path Setup
Slot Number
= 11 ----------------------------------
Model Number
= 8919-0
11: Port1 to Port2
Enable
On
12: Port1 to Mngmnt Enable
On
Port Access Control Setup
13: Port2 to Mngmnt Enable
On
----------------------------------
1: Fiber Enable
On
Bandwidth Control
2: UTP Enable
On
--------------------------------
14: Ingress rate Fiber
No Limit
Enhanced Features
15: Egress rate Fiber
No Limit
----------------------------------
16: Ingress rate UTP
No Limit
3: 802.1Q Processing Enable
Off
17: Egress rate UTP
No Limit
4: Configure Tag VLAN Control
5: Configure VLAN Membership
6: Save TAG VLAN parameters
7: Configure 802.3ah parameters
8: Configure 802.3ah events
9: SFP Information
10: cNode Loopback
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Page 28