RCA CC638/639 - Manual (Page 96)

94
Optional Accessories
VH54 Cable Transformer
This 75-to-300 ohm transformer is used to
connect a standard 75-ohm antenna cable
(such as VH82 or VH90) to the 300 ohm
screw terminals on a TV.
VH83 Audio/Video Cable
This six foot audio/video dubbing cable
can be used for copying tapes from the
camcorder to another VCR or camcorder.
AH25 Y-Adapter
This Y-adapter allows you to connect
your camcorder’s mono audio cable to a
stereo TV or VCR.
1CVA147C RF Output Adapter
This RF output adapter is used with a
coaxial RF cable, such as VH82 or VH90,
to connect your camcorder to a standard
TV (one without audio/video inputs) for
playback. If your antenna cable is the flat
twin-lead type attached by two screws,
you will also need a 300-to-75 ohm
transformer. If your TV has 300 ohm
antenna screw terminals, you will need an
optional 75-to-300 ohm transformer such
as VH54.
Coaxial RF Cables
These RF cables are used with the RF
output adapter to connect your camcorder
to a standard TV (one without
audio/video input jacks) for playback.
If your TV has 300 ohm antenna screw
terminals, you will need an optional
75-to-300 ohm transformer such as
VH54. If your antenna cable is the flat
twin-lead type attached by two screws,
you will also need an optional 300-to-75
ohm transformer.
All specifications and descriptions of accessories
are subject to change without notice.
VH82 (6-ft)
VH90 (12-ft)