RCA CC638/639 - Manual (Page 61)

Recording
59
Tally
Interval Timer
Rec Time OFF
JLIP ID NO. 0 7
ON
OFF
Tally Light
To Turn the Tally Light ON or OFF
1. Follow steps 1-4 on the previous page.
2. Press
4 or 3 on the mode select dial
to highlight Tally.
3. Press
6 on the mode select dial to start
Tally flashing.
4. Press
4 or 3 on the mode select dial
to turn the tally light ON or OFF.
• Select ON to have the tally light
turn on during recording.
• Select OFF if you do not want the
tally light to light.
5. Press
5 to stop Tally flashing.
6. Press MENU to exit the menu.
Set the JLIP ID NO.
The camcorder has a JLIP (Joint Level Interface Protocol) connector that may be
used in the future to connect a device, such as a home computer.
To Select a JLIP ID NO.
1. Follow steps 1-4 on the previous page.
2. Press
4 or 3 on the mode select dial
to highlight JLIP ID NO.
Tally
Interval Timer
Rec Time OFF
JLIP ID NO. 0 7
ON
OFF
3. Press
6 on the mode select dial to start
JLIP ID NO. flashing.
4. Press
4 or 3 on the mode select dial
to a number from 01 to 99.
5. Press
5 to stop JLIP ID NO. flashing.
6. Press MENU to exit the menu.