Ricoh 450e User Manual
Page 75
Sort/Stack/Staple
49
2
B
Select one of four stapling posi-
tions.
Note
❒ When your machine is
equipped with the 1000-sheet
finisher, this display is not
available. Go to Step
E.
C
To make punch holes, press the
[Punch]
key.
Note
❒ If you do not wish to make
punch holes, go to Step
D.
D
Press the
[OK]
key.
E
Enter the number of copy sets
with the number keys.
F
Set your originals.
When setting a stack of originals
in the document feeder
A Set a stack of originals in the
document feeder, then press
the {
Start
} key.
After all the originals are
scanned, the copies are deliv-
ered to the tray.
Note
❒ The last page should be on
the bottom.
When setting an original on the
exposure glass
A Set an original on the exposure
glass, then press the {
Start
}
key.
Note
❒ Start with the first page to be
copied.
B Set the next original.
Note
❒ Set the original in the same
direction as the first one.
C After all originals are scanned,
press the {
#
} key.
The copies are delivered to the
tray.
When setting a stack of originals
in the document feeder in SADF
mode
Reference
A Set an original in the document
feeder, then press the {
Start
}
key.
Note
❒ Start with the first page to be
copied.
ND2C0105
ND2C0101
ND2C0104