Ricoh Aficio 3235C User Manual
Page 67
Settings You Can Change with User Tools
55
4
❒ Paper will be delivered to the external tray when copying onto OHP trans-
parencies, thick paper, thick paper (back side) or 12"
× 18"paper from the
bypass tray, even if you have specified not to use the external tray as the
output tray.
❒ The left tray cannot be used as the output tray for duplex printing.
❖
❖
❖
❖ Output: Document Server (Document Server)
You can specify the tray to which documents are delivered.
Note
❒ Default: Standard Tray
❒ For details about output trays, see p.54 “Output: Copier (copier)”.
❒ The left tray cannot be used as the output tray for duplex printing.
❖
❖
❖
❖ Output: Facsimile (facsimile)
You can specify the tray to which documents are delivered.
Note
❒ Default: Standard Tray
❒ For details about output trays, see p.54 “Output: Copier (copier)”.
❒ The left tray cannot be used as the output tray for duplex printing.
❒ If you specify the left tray as the output tray when printing, prints are de-
livered printed side up.
❖
❖
❖
❖ Output: Printer (printer)
You can specify the tray to which documents are delivered.
Note
❒ Default: Standard Tray
❒ The output trays set on the printer driver have priority over the output tray
specified above.
❒ You cannot use the external tray as the output tray when making a 2 Sided
copy.
❒ For details about output trays, see p.54 “Output: Copier (copier)”.
❒ The left tray cannot be used as the output tray for duplex printing.
❖
❖
❖
❖
Currently three types of F size are available: 8
1
/
2
"
×13"L, 8
1
/
4
"
×13"L and
8"
×13"L. The ADF or exposure glass cover sensor cannot distinguish these
three types of originals. This function sets the F size from the ADF or expo-
sure glass cover sensor. Auto Paper Select or Auto Reduce/Enlarge can be
used for F size originals based on this setting.
Note
❒ Default: 8
1
/
2
"
×13"L
JupiterC2_GSG_GB_F2_Pre_FM.book Page 55 Thursday, June 2, 2005 1:57 PM