beautypg.com

Making the sound distort, Adding reverberation (reverb), Changing the reverb type – Roland VR-700 User Manual

Page 42: Adjusts the depth of the reverb effect (p. 44), Selects the type of reverb effect (p. 44), You choose “spring” as the reverb type (p. 44)

background image

44

Creating Organ Sounds

1.

Turn the Rotary Sound section’s [GAIN] knob toward the

right.

Turning the knob toward the right will raise the gain, adding

distortion to the sound.

The reverb effect adds reverberation to the sound.

fig.pnl-rev.eps

1.

Turn the REVERB [LEVEL] knob to adjust the reverb

depth.

Turning the knob toward the right will increase the reverb.

If you turn the knob all the way to the left, there will be no reverb.

Reverberation will be applied both to the organ sound and the

ensemble sounds. You can adjust the reverb balance between

the organ sounds and ensemble sounds. For details, refer to

Function mode “Reverb Send Level” (p. 52, p. 53).

By changing the reverb type you can experience the sensation of

performing in a variety of locations.

1.

Press the REVERB [TYPE] button.

The reverb type will change each time you press the [REVERB]

button, and the display will indicate the reverb type.

2.

Use the [–] button or [+] button to change the reverb

type.

Making the Sound Distort

About the amp types

The VR-700 also faithfully simulates the amp that is combined

with the rotary speaker. The VR-700 simulates five different

amp types, allowing you to produce various kinds of distortion.

You can change the amp type by editing the Function mode

setting “Amp Type” (p. 52).

From a jazzy sound to a heavily overdriven sound suitable for

rock, you can change the amp type to enjoy sounds suitable for

a variety of musical styles.

About the Active Amp Enhancer

Emphasizes the peculiarities of a particular amp’s distortion.

When turned on, the sound is modified in a way that makes the

lower range thicker while producing characteristic distortion in

the middle to upper ranges; this modification takes into

account the settings for the amp type and the current statuses

of the expression pedal and harmonic bars.

Turning the [GAIN] knob clockwise makes the effect stronger.

Changes can be made by means of the Function mode’s

“Active Amp Enhancer” (p. 52).

Adding Reverberation (Reverb)

Changing the Reverb Type

Display

Reverb type

Character

Room

The reverberation of a room

Hall

The reverberation of a large hall

Cathedral

The reverberation of a cathedral

Spring reverb

The reverberation of a spring
reverb unit

VR-700_e.book 44 ページ 2009年11月18日 水曜日 午前9時24分