Roland VR-700 - Manual (Page 12)

14
Names of Things and What They Do
fig.VR-700Front.eps
[V-LINK] button
This button turns V-LINK on/off (p. 64).
When this is on, the VR-700 can be used to control a V-LINK
compatible video device connected to the VR-700.
[MASTER VOLUME] knob
This knob adjusts the volume of the output from the OUTPUT
connectors on the rear panel and the PHONES jack (p. 23).
D Beam
You can vary the organ sound or ensemble sound by moving your
hand above the D Beam controller (p. 36).
Organ control/Bender lever
You can use the lever to vary the sound in real time.
* The [ORGAN CONTROL] button and [BENDER] button cannot be
turned on simultaneously.
Harmonic bars
Use these to create the organ sound. You can adjust the tone in real
time while you perform (p. 38).
[ENSEMBLE VOLUME] bar
This adjusts the volume of the ensemble sound (p. 29).
Top Panel
Control Function
[ORGAN CONTROL]
button
* Only organ
sounds will be
affected.
When this button is pressed to turn it on, the lever
will control the organ sound (p. 43).
[BENDER] button
* Only ensemble
sounds will be
affected.
If this button is pressed to turn it on, the lever will
vary the pitch of the sound or apply vibrato.
Pitch up
Change speed of
speaker rotation
Change speed of
speaker rotation
Pitch down
Modulation
Pitch up
VR-700_e.book 14 ページ ２００９年１１月１８日 水曜日 午前９時２４分