Roland VR-700 User Manual

Page 30

Playing the VR-700

3. Assigning an ensemble sound to the lower part

For ensemble sound 1

press the [TO LOWER/PEDAL] button; the lower part will switch to

ensemble sound 1, and the [TO LOWER/PEDAL] button will light.

For ensemble sound 2

Hold down the button of ensemble sound 2 and press the [TO

LOWER/PEDAL] button; the lower part will switch to ensemble

sound 2.

fig.ens-assign16.eps

The [TO LOWER/PEDAL] button indicates the status of

ensemble sound 1. If you hold down the button of ensemble

sound 2, the [TO LOWER/PEDAL] button will instead indicate

the status of ensemble sound 2.

4. Assigning an ensemble sound to the pedal part

For ensemble sound 1

ensemble sound is assigned to the Pedal part by holding down the

[TO LOWER/PEDAL] button and pressing the [–] button.

The [TO LOWER/PEDAL] button will light and “Pd” will be shown in

the display.

For ensemble sound 2

To assign the Ensemble 2 sound to the Pedal part, hold down both

the Ensemble 2 button and the [TO LOWER/PEDAL] button while

you press the [–] button.

If you hold down the [LOWER] and [UPPER] buttons and press

the [SPLIT] button, the Split function will turn on, allowing you

to play the upper part in the higher range of the keyboard and

Lights green:

Ensemble sound 2

VR-700_e.book 32 ページ２００９年１１月１８日　水曜日　午前９時２４分