Connecting pedals, Connecting a pedal keyboard, Connecting an expression pedal and damper pedal – Roland VR-700 User Manual
Page 18: Perform using the pedals (p. 20), Connect a damper pedal here (p. 20), This pedal to adjust the volume (p. 20), Here (p. 20). you can use this pedal to control
20
Getting Ready
Connect your pedal keyboard (PK-25A or PK-7A; sold separately) to
the MIDI PEDAL IN connector on the rear panel.
* When making connections, be sure to refer to the PK-25A or PK-7A
owner’s manual as well.
* There’s no need to set the MIDI channel for the PK-25A and PK-7A.
fig.ConnectPedalKey.eps
1.
Make sure that the VR-700 and the pedal you’ll be
connecting are turned off.
2.
Use a MIDI cable (sold separately) to connect the MIDI
OUT connector of the PK-25A or PK-7A to the VR-700’s
MIDI PEDAL IN connector. (The PK OUT connector is not
used.)
3.
If desired, connect the FOOT SW OUT connector of the
PK-25A or PK-7A to the VR-700’s CONTROL PEDAL
connector.
* For details on the functions that can be controlled by a foot switch
connected to the VR-700’s CONTROL connector, refer to “Functions
that can be assigned to the control pedal” (p. 55).
* There’s no need to make a connection between the EXPRESSION
OUT connector of the PK-25A or PK-7A and the VR-700.
* When making connections, please refer also to the owner’s manual
for the pedals you’re using.
fig.ConnectPedals.eps
1.
Make sure that the VR-700’s power is turned off.
2.
Connect your damper pedal to the DAMPER PEDAL
connector on the rear panel.
3.
Connect your expression pedal to the EXP PEDAL
connector on the rear panel.
4.
Connect your damper pedal, expression pedal, or foot
switch to the CONTROL PEDAL connector on the rear
panel.
* An expression pedal, damper pedal, and foot switch are not
included. For details on the types of pedals that can be connected to
the VR-700, refer to “Specifications” (p. 80). If you want to purchase
these items, please contact the dealer where you purchased the
VR-700.
* Use only the specified expression pedal (EV-5 or EV-7; sold
separately). By connecting any other expression pedal, you risk
causing malfunction and/or damage to the unit.
Connecting Pedals
Connecting a Pedal Keyboard
MIDI cable
To MIDI OUT connector
PK-7A
PK-25A
To MIDI PEDAL IN connector
Connecting an Expression Pedal and
Damper Pedal
Damper pedal
Expression pedal
Footswitch
VR-700_e.book 20 ページ ２００９年１１月１８日 水曜日 午前９時２４分