Roland SP-606 - Manual (Page 62)

62
Chapter 6. Pattern Editing
1. Go to the Pattern Play screen (p. 15).
2. Turn the VALUE dial or use [DEC][INC] to select the pattern you want to delete.
You can also choose a pattern from the pattern list (p. 24).
3. Press [F2] (EDIT) to get the PATTERN EDIT screen.
4. Hold down [FUNC] and press [F1] (DELETE) to get the PATTERN
DELETE screen.
5. Press [F3] (EXEC) to delete the pattern.
If you decide to cancel, press [F2] (CANCEL).
1. Go to the Pattern Play screen (p. 15).
2. Press [F2] (EDIT) to get the PATTERN EDIT screen.
3. Hold down [FUNC] and press [F2] (COPY) to get the PATTERN COPY
screen.
4. Use [ ][ ] to move the cursor, and turn the VALUE dial or use
[DEC][INC] to select a pattern.
Upper line: copy source
Lower line: copy destination
5. Press [F3] (EXEC) to copy the pattern.
If you decide to cancel, press [F2] (CANCEL).
Deleting a Pattern
Copying a Pattern
SP-606_e.book 62 ページ ２００４年６月２１日 月曜日 午前１０時８分