Roland VS-1824 - Manual (Page 61)

61
Making a Multi-Track Recording
Making a Multi-Track
Recording
9
By continuing to hold down [STATUS] for a time, you can
check which source is assigned to which track.
fig.3-29_80
10
Raise and lower channel fader 3 to hear the volume change.
The track channel fader is used for monitoring. It does not
affect the recording level. You will be able to record even if
you don’t hear any sound. Adjust the level to a comfortable
monitoring volume. You can use channel fader 1 to adjust the
volume of the playback track.
11
Press [REC]. The [REC] indicator will blink red.
12
Press [PLAY]. The [PLAY] indicator will light green, and
recording will begin.
13
When you finish recording, press [STOP].
14
For each track whose [STATUS] is blinking red, press the
[STATUS] button several times to make it light green.