Roland VS-1824 - Manual (Page 118)

118
Add Finishing Touches to Your Song
Playing back the mastering tracks
Here’s how you can verify the audio that was mixed down to the mastering
tracks.
Tracks 1–16 will not be played back.
fig.5-30
1
Press [PLAY (DISPLAY)].
2
Press [PAGE] so that [F6] indicates “M
→
***” (*** is either Rec,
Ply, or Off).
3
Press [F6] to cycle between “M
→
Rec”
→
“M
→
Play”
→
“M
→
Off.” This allows you to change the mastering track
switch and mastering track status at the same time. The
current status of the mastering tracks can be viewed in the
level meter in the display. For this example, select “M
→
Off”
(playback status: pressing [F6] once again will select Off).
fig.2-12.e
1 2 3 6 6
5
7
For details on the signal
flow at this time, refer to
Signal Flow (Routing) (p.
119).
Off Record wait Status Playback Status