Roland VS-1824 - Manual (Page 40)

40
Making a Multi-Track Recording
Recording On a Track
This section explains the procedure for using a mic connected to the INPUT1
jack to record an acoustic guitar performance to track 1.
fig.3-11a
1
Press [PLAY (DISPLAY)].
2
Press [FADER/MUTE] so that the IN (input) indicator is lit.
3
Raise and lower channel fader 1, and verify that the volume
changes. The input channel fader is used to make fine
adjustments to the recording level. In order to record with the
optimal audio quality, you should normally set the fader at
0 dB.
4
Press [FADER/MUTE] so that the TR (track) indicator is lit.
5
Hold down [STATUS] (any track is OK) and press [CLEAR].
2, 4 1
5 6 3, 9
7
This will clear any existing
input and/or track routing
assignments.